EH47止裂钢的热变形行为及热加工图构建Hot Deformation Behavior and Hot Processing Map of EH47 Marine Crack-Arresting Steel
胡阳阳,曹少松,吴少雄,王佳,胡文莉,赵金华
摘要(Abstract):
基于Gleeble-3800D热力模拟实验平台,围绕EH47止裂钢在不同变形条件下(变形温度850~1150℃、应变速率0.01~1 s~(-1))的热变形行为进行了系统研究。采用单道次热压缩试验获得材料在不同变形条件下的真应力–真应变曲线,并基于双曲正弦Arrhenius关系建立了高温本构模型。结合加工硬化率法确定了动态再结晶临界参数,构建了动态再结晶动力学模型及热加工图。结果表明,EH47止裂钢在热变形过程中表现出典型的加工硬化、动态回复和动态再结晶特征,流变应力随变形温度升高和应变速率降低而减小;动态再结晶临界应变随变形温度升高而减小,随应变速率增大而增大;热加工图表明,在本研究考察的变形参数范围内,材料未出现明显失稳区,整体具有较好的热加工性能,其中较高温度区域表现出更好的热加工适应性。研究结果可为EH47止裂钢热加工过程的数值模拟及工艺参数优化提供试验和理论参考。
关键词(KeyWords): EH47止裂钢;热变形;本构模型;动态再结晶;热加工图
基金项目(Foundation):
作者(Author): 胡阳阳,曹少松,吴少雄,王佳,胡文莉,赵金华
DOI: 10.16666/j.cnki.issn1004-6178.2026.04.010
参考文献(References):
- [1]中国船级社.船用高强度钢厚板应用指南2024[S].北京:中国船级社,2024.
- [2]赵捷.我国高品质船舶、海洋工程用钢研究进展[J].材料导报,2018(A01):428-431.
- [3]韩绍根,白锦函,范丽伟,等. EH36高强度船体结构用钢的开发[J], 2011, 19(3):3.
- [4]陈妍,齐殿威,吴美庆.国内外高强度船板钢的研发现状和发展[J], 2011, 032(005):26-30.
- [5]Ouchi C. Development of steel plates by intensive use of TMCP and direct quenching processes[J]. ISIJ international, 2001, 41(6):542-553.
- [6]李大赵,索志光,崔天燮,等.采用TMCP技术的低碳低合金高强钢生产的研究现状及进展[J].钢铁研究学报,2016, 28(1):1-7.
- [7]Nishioka K, Ichikawa K. Progress in thermomechanical control of steel plates and their commercialization[J]. Science and Technology of Advanced Materials, 2012, 13(2):023001.
- [8]IGI S, MIYAKE M. Development of Thermo-Mechanical Control Process(TMCP)and High Performance Steels in JFE Steel[J]. JFE Technical Report, 2021, 26:86-94.
- [9]孙悦,牛文龙,机械工程学报张J. GH4151合金的热变形行为及动态再结晶研究[J], 2024, 60(8):143-153.
- [10]Li C-M, Tan Y-B, Zhao F J J O I, et al. Dynamic recrystallization behaviour of H13-mod steel[J], 2020, 27:1073-1086.
- [11]Mcqueen H, Sauerborn M J I J O M R. Hot workability and extrusion modelling of magnesium alloys[J], 2022, 96(6):638-644.
- [12]Wang Y, Li J, Xin Y, et al. Effect of Zener–Hollomon parameter on hot deformation behavior of CoCrFeMnNiC0. 5 high entropy alloy[J],2019, 768:138483.
- [13]Yada H, Senuma T J J J S T P. Resistance to hot deformation of steels[J], 1986, 27(300):34-44.
- [14]Quan G-Z, Shi R-J, Jiang Z, et al. Modeling of dynamic recrystallization volume fraction evolution for AlCu4SiMg alloy and its application in FEM[J], 2019, 29(6):1138-1151.
- [15]Zhou F, Guo J, Zhao Y, et al. An improved cellular automaton model of dynamic recrystallization and the constitutive model coupled with dynamic recrystallization kinetics for microalloyed high strength steels[J], 2023.
- [16]Yao Y, Sun C, Xiu S, et al. Study on dynamic recrystallization-based microstructure evolution mechanism of 40Cr during strengthening grinding[J], 2022, 309:117754.
- [17]Tikhonova M, Dudko V, Belyakov A, et al. The formation of fine-grained structure in S304H-type austenitic stainless steel during hot-towarm working[C]. Materials Science Forum, 2012:380-385.
- [18]Sellars C, Whiteman J J M S. Recrystallization and grain growth in hot rolling[J], 1979, 13(3-4):187-194.
- [19]Qin J, Zhang Z, Chen X J a M S. Evolution of activation energy during hot deformation of Al–15%B4C composites containing Sc and Zr[J],2019, 6(4):484-497.
- [20]Peng X, Su W, Xiao D, et al. Investigation on hot workability of homogenized Al-Zn-Mg-Cu alloy based on activation energy and processing map[J], 2018, 70:993-999.
- [21]Li X, Hou L, Wei Y, et al. Constitutive equation and hot processing map of a nitrogen-bearing martensitic stainless steel[J], 2020, 10(11):1502.
- [22]Prasad Y, Rao K, Sasidhar S. Hot working guide:a compendium of processing maps[M]. ASM international, 2015.