基于SLM工艺制备的316L奥氏体不锈钢热变形与晶粒长大行为研究Hot Deformation and Grain Growth Behavior of SLM-Fabricated 316L Austenitic Stainless Steel
乔胥,陈飞,杜振纲,张子栋
摘要(Abstract):
为探究SLM工艺制备的316L不锈钢热变形及晶粒长大行为,以SLM态316L钢为研究对象,利用Gleeble-3800热模拟试验机进行了高温热压缩实验,变形温度为900℃~1200℃,应变速率为0.001 s~(-1)~1 s~(-1);使用马弗炉进行了晶粒长大实验,保温温度为1000℃~1200℃、保温时间为1 h~8 h.系统地探究了热压缩过程中变形温度、应变速率,以及高温保温过程中保温温度、保温时间对微观组织演变规律的影响,揭示了相关演变机制。结果表明,在相同变形温度下,应变速率越低,越有利于动态再结晶的发生;在相同应变速率下,变形温度越高,越有利于动态再结晶的发生与晶粒的长大。保温温度和保温时间对晶粒长大有重要影响,在较低的保温温度下(保温温度低于1000℃),即便保温较长的时间晶粒也难以长大;而当保温温度高于1100℃时,晶粒可迅速长大,且温度越高,保温时间越长,晶粒越大。
关键词(KeyWords): 316L奥氏体不锈钢;选区激光熔化;热变形;晶粒长大;微观组织演变
基金项目(Foundation): 山西省基础研究计划资助项目(202203021222208)
作者(Author): 乔胥,陈飞,杜振纲,张子栋
DOI: 10.16666/j.cnki.issn1004-6178.2026.04.011
参考文献(References):
- [1]Li S,Withers P J,Kabra S,et al. The behaviour and deformation mechanisms for 316L stainless steel deformed at cryogenic temperatures[J].Materials Science and Engineering:A,2023,880:145 279.
- [2]Sghaier T A M,Sahlaoui H, Mabrouki T,et al. Selective laser melting of stainless-steel:a review of process,microstructure,mechanical properties and post-processing treatments[J].International Journal of Material Forming,2023,16(4):41.
- [3]Pimenov D Y,Berti L F,Pintaude G,et al.Influence of selective laser melting process parameters on the surface integrity of difficult-to-cut alloys:comprehensive review and future prospects[J].The International Journal of Advanced Manufacturing Technology,2023,127(3):1 071-1 102.
- [4]蒋华臻,房佳汇钰,陈启生,等.激光选区熔化成形316L不锈钢工艺、微观组织、力学性能的研究现状[J].中国激光.2022,(14):309-329.
- [5]Liu Y,Zhang C,Wang Y,et al.Reveal the hot deformation behaviour and microstructure evolution in additively manufactured 316L stainless steel[J]. Materials Science and Engineering:A,2022,861:144 290.
- [6]Zhao G,Tian Y,Li H,et al.Microstructure evolution and dynamic recrystallization mechanisms of 316L stainless steel during hot deformation[J].Archives of Civil and Mechanical Engineering,2024,24(1):35.
- [7]刘涛,尹志强,雷经发,等.选区激光熔化316L不锈钢高应变率压缩下的塑性变形行为[J].材料研究学报.2023,(5):391-400.
- [8]Kurian S,Mirzaeifar R.Deformation mechanisms of the subgranular cellular structures in selective laser melted 316L stainless steel[J].Mechanics of Materials,2020,148:103 478.
- [9]Gao S,Hu Z,Duchamp M,et al.Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting[J].Acta Materialia,2020,200:366-377.
- [10]汪洋扬,孙明艳,陈捷,等.热处理温度对选区激光熔化成形316L不锈钢冲击韧性及各向异性的影响[J].中国激光.2024,(12):147-155.
- [11]Kale A B,Singh J,Kim B K,et al.Effect of initial microstructure on the deformation heterogeneities of 316L stainless steels fabricated by selective laser melting processing[J].Journal of Materials Research and Technology,2020,9(4):8 867-8 883.
- [12]Khodabakhshi F,Hasani N,Kalaie M R,et al.Dynamic recrystallization under hot deformation of additively manufactured 316 L stainless steel[J].Materials Characterization,2023,202:113 055.
- [13]Saxena A,Dwivedi S P,Sharma S,et al.Synergistic mechanisms of temperature and strain rate on plastic deformation in SLM 3D printed SS316L utilizing hot processing map analysis[J].Scientific Reports,2025,15(1):16 268.
- [14]Aziz U,McAfee M,Manolakis I,et al.A Review of Optimization of Additively Manufactured 316/316L Stainless Steel Process Parameters,PostProcessing Strategies,and Defect Mitigation[J].Materials,2025,18(12):2 870.
- [15]朱学超,魏青松,孙春华.激光选区熔化成形S136模具钢热处理组织和性能研究[J].粉末冶金技术.2019,(2):83-90.
- [16]Li X,Yi D,Wu X,et al.Study on mechanism of structure angle on microstructure and properties of SLM-fabricated 316L stainless steel[J].Frontiers in Bioengineering and Biotechnology,2021,9:778 332.